8c Firmware

From
Revision as of 14:42, 19 March 2019 by Kevinkleine (talk | contribs)
Jump to: navigation, search

Introduction

The 8c has an on-board computer to allow changing DSP and boundary settings, digital sync, direct streaming, etc. The computer runs a software stack called Clerk on top of Linux, which features a REST API for control, state management, a container based update system and more. Clerk is able to update itself by downloading signed update packages from our server and installing them. Below is a list of the latest firmware releases.


Releases

1.3.16

  • Fixed standby unmuting
  • Updated embedded Lanspeaker

1.3.15

  • Enhanced startup algorithm to avoid a faint tone

1.3.14

  • Reduced amount of mute calls (less tick/click noise)
  • Enhanced DSP writing algorithm

1.3.13

  • Implemented DBus logging through Clerk.
  • Enhanced stream selection identifiers.
  • Enhanced group delay, speaker delay is now the minimum required
  • Disabled sub output mute in the defaults.

1.3.12

  • Roon can now only mute the speaker while streaming
  • Fixed preset loading issue

1.3.4

1.2.3